
CTM048-021, EM Eye ESD Event Meter
- Detects, counts and measures ESD events that can damage ESD items and cause tool lock-ups, erratic behavior and parametric errors
- Calculates event magnitude for Charged Device Model (CDM), Human Body
Model (HBM) and Machine Model (MM) - Records all measurements to a microSD card for PC download
- Touchscreen display provides intuitive user interface
- Rechargeable lithium ion battery
DOWNLOAD DATA SHEET

CTM051 Ground Pro Meter
- Verifies Critical Grounding Parameters of a Facility
Measures AC voltage, DC voltage, EMI voltage and AC impedance - Provides Accurate Measurements of Ground Impedance on a Working Tool
Meets ANSI/ESD S20.20 requirements for AC impedance - Identifies Potential EOS Generators
Measures maximum millivolt requirement of IPC-A- 610 - Auto-Zero Function for Test Leads
Factors out the impedance of the test leads for improved measurement accuracy - Programmable Impedance Alarm
Audible alarm sounds when impedance measurement is below threshold set by operator
DOWNLOAD DATA SHEET

CTM082 – ESD Pro Event Indicator
- ESD Event Indicator
Detects and counts ESD events for control program troubleshooting and improvement. - Ten LED Display
Shows the relative strength of the ESD event. - Adjustable Alarm Threshold
Use the rotary switch to set the strength for which the ESD event must meet in order to be counted. - Four-Digit Counter
Displays the number of ESD events that occurred at or above the alarm threshold. - CDM Filter Switch
Filters and rejects EMI signals that are not caused by Charged Device Model discharges. - Portable Operation with 9 Volt Battery
DOWNLOAD DATA SHEET

701 Analog Surface Resistance Megohmmeter Kit
- Lightweight, user-friendly Analog Surface Resistance Megohmmeter
- Two different test scales and settings for testing both surface-to- ground (Rtg) and surface-to- surface (Rtt) resistance
- Color-coded number scales help identify ideal resistance ranges
- Kit contains:
– 1 Megohmmeter
– 2 Test Weights (5 lbs. each)
– 2 Test Leads (10 ft. each)
– 1 Insulated Bulldog Clip
– 1 Alligator Clip
– 1 Continuity Test Plate
– 2 Batteries (3.6V and 1.5V)
– 1 Molded Carrying Case
DOWNLOAD DATA SHEET

770760 Resistance Pro Meter Kit
- Large OLED Display
Displays resistance mantissa and exponent, temperature, relative humidity and test voltage - Internal Memory
Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltage. - Digital Compliance Verification Surface Resistance Meter Kit
Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and others - Resistance Range: 1.0 x 103 to 1.0 x 1012 Ohms
- Kit Includes:
- 1 Digital Surface Resistance Meter
- 2 Test Leads, 5′ Length
- 2 5 lbs. Electrodes
- 1 Electrode Spacer, 10″
- 1 Electrode Spacer, 36″
- 4 AA Alkaline Batteries
- 1 Ground Plug Adapter
- 1 Gator Clip
- 25 Measurement Location Labels
- 1 Plastic Carrying Case
- 1 Certificate of Calibration
DOWNLOAD DATA SHEET

770757 Two Point Resistance Probe
- 2-Point (Two Pin) Resistance Probe for Small Samples or Small Areas
Measures surface resistance per ANSI/ESD STM11.13-2015 - Gold Plated, Spring-Loaded Pins with Conductive Rubber Electrodes
Maintains consistent contact with small and/or non-flat surfaces - Compatible with the SCS 770760Resistance Pro Meter Kit
DOWNLOAD DATA SHEET

770007 Concentric Ring Probe
- Concentric Ring Probe for Surface Resistance Meters
Measures surface resistance per ANSI/ESD STM11.11 and volume resistance per ANSI/ESD STM11.12 of planar material - Spring Loaded, Self-Aligning Center Electrode
Maintains consistent contact between the fixture’s conductive rings and the material under test - Compatible with the SCS 770760Resistance Pro Meter Kit
DOWNLOAD DATA SHEET

770045 EOS/ESD Assessment Kit
- SCS EOS/ESD Assessment Survey Kit
Use to measure, verify and qualify products for use in the ESD Protected Area in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and other documents. - Kit Includes
- 770760 Resistance Pro Meter Kit
Measures resistance point-to-point (Rtt) or surface-to-ground (Rtg) - 770765 Handheld Electrode
Meets resistance measurement requirements of TR53 and ANSI/ESD STM97.1 - CTM048-21 EM Eye – ESD Event Meter
Detects, counts and measures ESD events that can damage ESD items and cause tool lock-ups, erratic behavior and parametric errors - CTM051Ground Pro Meter
Confirms that an AC electrical outlet’s wiring is correct and the path to equipment ground conductor (the green wire) is intact and to measure ground impedance in accordance with ANSI/ESD S6.1 and ANSI/ESD S20.20 required limits - 718 Static Sensor and 718A Air Ionizer Test Kit
Measures electrostatic fields, offset voltage (balance) and charge decay of ionization equipment - ESD Training Paddles Set
Demonstrates the creation and polarity of electrostatic charges and the functionality of ESD control products
DOWNLOAD DATA SHEET