770058 Dual Combination Tester 

  • Tests Operator’s Path-To-Ground; Wrist Strap Limits 750 kilohms to 10 megohms, Footwear Limits 750 kilohms to 35 megohms
    Determines that operator’s personnel grounding devices (wrist straps, foot grounders, ESD shoes, smocks) are functioning correctly.
  • Compatible with Single-Wire and Dual-Wire Wrist Straps
    Simultaneous Testing of Wrist Strap and Footwear in Less Than 3 Seconds
    Reduces time spent testing personal grounding devices used in ESD Control Plans
  • Solid-State Test Switch with No Moving Parts
    Maintains accuracy of tests and extends the lifetime of the tester
  • Split Foot Plate for Testing Foot Grounders (or ESD Shoes)
    Tests both foot grounders independently at the same time
  • 30 Volt Test Signal
    Provides accurate tests that are not humidity dependent
  • Relay for Use with Automatic Doors or Other Locking Systems
    Controls access to ESD Protected Areas
  • Optional Stand (#770759) available
  • NIST Calibrated with Certificated Included
  • 100-240VAC Power Adapter with Interchangeable Plugs
DOWNLOAD DATA SHEET

50780 Smart Log Pro, Wrist Strap / Footwear Tester cum Logger

The SmartLog Pro™ verifies the functionality of an operator’s wrist strap and footwear, logs the test results, and controls access to an ESD Protected Area (MEASURE – CONTROL – VERIFY)

  • Tests the Operator’s Path-to- Ground
    Determines if the operator’s personal grounding devices are functioning correctly
  • Electronic Data Acquisition
    Creates test record database for auditing and quality control
  • Operator Identification
    Tests operators based on assigned test requirements
  • Relay Terminal
    Pairs with a turnstile, automatic door or other locking system to control access to ESD Protected Areas
  • Simultaneous Testing in Less Than 2 Seconds
    Reduces time spent testing personal grounding devices used in ESD Control Plans
  • Stand-Alone Operation
    Operators can continue performing tests even in the event of a network failure
  • Embedded CCD Barcode Scanner
    Reads code 39 and 128 by default; contact customer service for custom programming of other symbologies
  • Split Foot Plate for Testing Foot Grounders (or Shoes)
    Tests both foot grounders independently at the same time
  • Works with TEAM5 Software
  • Monitors the ESD status of operators and the network connectivity of SmartLogs
  • ESD status reports available via e-mail or web
  • Data synchronization between personnel databases
  • E-mailed notifications of software or operator failures
  • Compatible with all Windows operating systems
  • Desktop and server installation packages available
DOWNLOAD DATA SHEET